Geometric DFMPro v4.2.1-4.6.1 for ProE WF/Creo x86/x64-SSQ | 856 MB
INFORMATION
DFMPro (Design For Manufacturbility Professional) is an easy-to-use tool for testing the manufacturability of parts and assemblies for designers and process engineers integrated in Pro / ENGINEER. Its use makes it easier to check the processability and identify parts of the project that can be labor-intensive or costly in manufacturing for turning, milling, turning and milling, sheet processing,
Express analysis of the workability of the part in terms of the possibilities and principles of milling or turning is performed thanks to the DFMPro module. You simply select the type of part – milling or turning – and in a few seconds you will get a detailed report on possible processing problems. DFMPro will find all elements inaccessible to the cutter that do not correspond to the standards of the enterprise by the depth / diameter ratio or by belonging to the standard range of hole diameters, rounding of the outer edges and trihedral internal corners, holes facing the outer faces not perpendicular to them or crossing internal cavities, and even Overestimated tolerance.
For turning parts, grooves without fillets of internal diameter and all non-rounded circular edges will also be found. Numerical values ââof the criteria for manufacturability can be changed in a wide range in accordance with the requirements of the enterprise.
DFMPro is used in the case of increased requirements for the system’s ability to check the workability of parts, as well as for the use of such tools in relation to turning-milling and sheet parts. This module performs more checks – and it checks not only the geometry of the part, but also customized attributes, for example, the brand of material – but also allows you to customize the analysis rules to a much wider range.
Year / Release Date: 2017
Version: v4.2.1.3676, v4.6.1.4458
Developer: Geometric Global
Developer’s site:
Code: Select Allhttp://www.geometricglobal.com/
http://dfmpro.geometricglobal.comDigit: 32bit, 64bit
Language: English, Chinese
Tabletka: Present (TeAM SolidSUAD-SSQ)
System requirements: Preinstalled
ProEngineer WildFire 4-5 32/64 bit
Creo Elements / Pro 32/64 bit
Creo Parametric 1.0-2.0 32/64 bit
Creo Parametric 3.0 64 bit only
Сreo Parametric 4.0 is not officially supported, but it can be connected-see readme.txt in the crowbar for FDMPro for Creo Parametric 3.0
If you like my post, don’t forget to say Thanks and help keep the thread alive. Thank You!
