Siemens FiberSIM 14.1.3 (NX 8.0-10.0 integration) 64bit-SSQ

Siemens FiberSIM 14.1.3 (NX 8.0-10.0 integration) 64bit-SSQ | 299 MB

The program can be installed and how Standalone (without pre-NX 8.0-10.0 64-bit and is integrated into the pre-NX 8.0-10.0 64-bit

Description: FiberSIM from Siemens PLM Software allows professionals to the aerospace, automotive and wind energy industries to optimize the weight, cost and performance characteristics of PCM products (polymeric composite materials) due to precise control of the orientation of the reinforcing fibers.

Application Fibersim provides risk reduction by optimizing the design and manufacture of durable and lightweight innovative designs in aerospace, automotive and wind energy industries. The package was developed by Vistagy, Siemens acquired December 7, 2011 and is the commercial division of Siemens PLM Software.
Fibersim reduces uncertainty behavior of composite parts under loads by describing the required orientation of the transfer and testing of fibers throughout the product development process, enabling precise compliance with the specified specifications. With handy tools, eliminates errors when working with the design data, you can reduce the risk of designing complex parts overweight uncertain properties and excessive cost.
FiberSIM – an advanced solution for product development of the RMB, helping world leaders aerospace, automotive, wind energy and other industries to successfully meet the challenges throughout the entire production cycle – from the development of the conceptual design, detailed design, simulation calculations layer and create production data to the quality control . Fibersim can be fully integrated with the market-leading commercial 3D CAD systems.
Benefits Fibersim:
•
Advanced optimization of the design phase
Fibersim helps to reduce the degree of uncertainty under the load behavior of the FRP products thanks to a new coordinate system for the guide (Spine-Based Rosette), which enables simulation of stacking materials with orientation along the path. This information can be transmitted between all participants during the development process cycle. Providing the necessary orientation of the fibers manufactured parts – whether stringer airframe, vehicle frame or 60-meter wind turbine blade – is a critical factor in weight management and performance of this product.
•
Accurate modeling of composite materials laying on complex shapes
In Fibersim package was first introduced the Enhanced modeling of technological processes for multi-layer materials, including multiaxial fabric. These functions form the basis Fibersim, allowing to simulate an even greater number of materials and production processes with the help of the first in the history of functions of Technology Modeling the guide (Spine-Based Simulation) for parts with buckling. Material to be placed along the generator of such items as aircraft stringer, desk car body or the guide blades of the wind turbine will have a local deformation and waviness. Determining the causes of these phenomena at an early stage of the production cycle allows the key to make the right decisions for the timely and cost-effective provision of details of the expected strength.
•
Effective transfer of a full description of the items between the departments of design and calculations
The program introduces a new functional exchange descriptions multiaxial fabrics and fillers. This functionality enables effective collaboration between designers and prochnistami taking into account the most important component throughout the product development cycle. To accurately calculate the stiffness and strength of the parts must take into account the specific characteristics of multiaxial fabrics and fillers, commonly used in the design in the aerospace, automotive and wind energy industries.
•
Simplifying the design process of composite parts and documentation
Fibersim helps simplify the process of developing composite parts with new, easy-to-use design tools and documentation generation, created for engineers with different experience in RMB. The most difficult and time-consuming task in the design process is to work with the specifications of escaping between the zones of constant thickness. In Fibersim package first introduced Visual function runout Profile Editor (Visual Stagger Editor) to simplify the work with such specifications. Large aerospace panels, such as wings, tail stabilizers, or have a substantial number of different profiles runout. Profile Editor taper facilitates the development of profiles and reduces the chance of design errors.

Year / Release Date: 2016
Version: 14.1.3
Developer: Siemens PLM Software
Developer website: http: //www.plm.automation.siemens.com/
Bit depth: 64bit
Language: English
Medicine: Present (TeAM SolidSQUAD-SSQ)
System requirements: Win 64-bit, for integration into the NX- ne is that Siemens NX 8.0-10.0 64bit

Download Via RapidGator

http://rapidgator.net/file/65d608ee5c88ace15d6a6bcd74ab1008/Siemens.Fibersim.14.1.3.NX.Win64-SSQ.rar.html

Download Via NitroFlare

http://nitroflare.com/view/7B903DAF50B5D44/Siemens.Fibersim.14.1.3.NX.Win64-SSQ.rar

Download Via UploadGig

http://uploadgig.com/file/download/74E379Db6edeA585/Siemens.Fibersim.14.1.3.NX.Win64-SSQ.rar