Mentor Graphics HyperLynx VX.2.10 (x64)

Mentor Graphics HyperLynx VX.2.10 (x64)

Mentor Graphics HyperLynx VX.2.10 (x64) | 5.3 GB | Language: English

[spoiler]
Mentor Graphics Corporation, a Siemens business, is pleased to announce the availability of HyperLynx VX.2.10. The latest release provides significant new capabilities for the design and verification of high-speed serial (SerDes) links, DDRx interfaces, and board-level Power Delivery Networks (PDNs).

HyperLynx is an integrated family of analysis toolsfor high-speed digital design and verification. It makes state-of-the-art simulation available to a broad audience by combining advanced modeling and simulation techniques with automated flows that guide you through the process step by step.
HyperLynx combines ease of use with automated workflows to make high-speed design analysis accessible to mainstream system designers. This allows problems to be identified and resolved early in the design cycle. HyperLynx works with multiple PCB tools and is an ideal addition to any PCB design flow.
The HyperLynx family provides a complete analysis flow that combines best-practice design rule checking with comprehensive signal and power integrity simulation. Integrated 3D EM solvers create highly accurate interconnect models.
HyperLynx SI :Evaluate design tradeoffs with pre-layout analysis and validate designs prior to fab with post-layout analysis. Supports SerDes channels, DDRx memory interfaces, and general-purpose signal integrity.
HyperLynx Advanced Solvers:Integrated high-accuracy, high-capacity 3D electromagnetic simulation-full wave, quasi static, and hybrid solvers-with a common graphical interface for design editing and case management.
HyperLynx PI:Design and validate a board’s power-delivery network (PDN) to meet impedance goals in an easy-to-use, “what-if” environment and optimize designs for cost and performance.
HyperLynx DRC:Fast, rules-based electrical design verification for PCB designers, system designers, and SI/PI/EMC experts, regardless of their layout tool or level of domain expertise.
The VX.2.10 release of HyperLynx provides significant new capabilities for the design and verification of high-speed serial (SerDes) links, DDRx interfaces, and board level Power Delivery Networks (PDNs).
What’s New in VX.2.10 Release
Mentor Graphics Corporation, a Siemens business,is a world leader in electronic hardware and software design solutions, providing products, consulting services, and award-winning support for the world’s most successful electronic, semiconductor, and systems companies. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777.

HyperLynx VX.2.10 Compatible PCB Flows
All HyperLynx VX.2.10 products are fully compatible with the following PCB flows:
– Xpedition Enterprise VX.2.10
– Xpedition Package Integrator VX.2.10
– PADS VX.2.10
– PADS Professional VX.2.10
– Valor NPI v11.3
Generally, if you integrate to your layout tool (Siemens or 3rd-party) only through HYP, CCE, or ODB++ layout files, then HyperLynx SI/PI is very likely to work in all respects with your designs, even with pre-VX.2.2 versions of Xpedition or PADS / PADS-Professional. This is also applicable to BSXE V10. If you use a Siemens EDA PCB tool (Xpedition, PADS or PADS-Professional) and rely on “deeper” integration between HyperLynx and the PCB flow (for example, passing of data between Constraint Manager and LineSim/BoardSim), you should use HyperLynx VX.2.10 only with one of the specific VX.2.10 tool versions listed above.
One integration feature, use of the Analysis Control plug-in to run DC-drop simulations from directly within Xpedition Layout, is limited to the Xpedition Enterprise X-ENTP VX.2.10 flow and only on Windows
Supported Platforms
Overall Notes
– Specified patches below are minimum levels. Later versions of the patches are valid, supported configurations.
– Except as noted, all products are supported on all platforms.
– Processor and Memory requirements vary based on the mix of applications being used, the design complexity, and infrastructure requirements. Individual needs may vary from those published below.
HyperLynx-Specific Memory Recommendations
The following are general recommendations, based on typical usage. Memory consumption varies significantly depending on the size and other details of your designs. If you plan to use the following features, it is recommended that you install at least8 GB of RAM in your machine:
– Simulation sweeps (if a large number of parameter variations are enabled simultaneously)
– DDRx batch simulation under certain circumstances (especially with the “power-aware” option enabled)
For these features, 8 GB and preferably 16 GB are recommended:
– Power-integrity analysis of post-layout designs in BoardSim
– 3D EM simulation in the HyperLynx Full-Wave Solver (from either LineSim or BoardSim)
For this feature, 16 GB and possibly 32 GB are recommended:
– “Advanced decoupling analysis” using the new 2.5D power-integrity engine
In the sections below, the memory requirements do not assume use of these memory-intensive features
HyperLynx-Specific Graphics Processing Unit (GPU) Recommendations
We have tested OpenGL with a variety of hardware, operating system, graphics cards, and drivers and have not experienced any problems for many years. It should be noted that our products require graphics cards and drivers that support OpenGL version 1.3, 2.0, and 3.0. If any problems are encountered, we encourage you to go to the graphics card vendor website and download the latest version of the driver. If the issue persists, please contact customer support.
– 3D EM simulation in the HyperLynx Full-Wave Solver
Microsoft Windows 10 (Version 1909 and newer)
Microsoft Windows 10 (64-bit), Enterprise Edition and Pro Edition are supported.
While there is no known issue with running Microsoft Windows 10 Home Edition or Educational Edition, the product has not been tested with these editions, and therefore is not supported.
Kernel Configuration:N/A
Processor:Dual-core Intel or AMD processor minimum. See Processor Note for Intel/AMD Processors above.
Memory:8GB recommended
Swap Space:2x the amount of RAM
Windows Server 2016
Additional OS Patches (the following 64-bit configurations are supported):
– Microsoft Windows Server 2016, with all current updates via Windows Update
Warning: Windows Server 2016 does not by default include an internet web browser.
HyperLynx product documentation requires the installation of an internet web browser.
Windows Server 2016 users should download and install your choice of browsers (Edge,
Firefox or Chrome Browsers).
Processor:Dual-core Intel or AMD processor minimum. See Processor Note for Intel/AMD Processors above.
Memory:8 GB recommended (per simultaneously logged in user)
Swap Space:2X the amount of RAM
Windows Server 2019
Additional OS Patches (the following 64-bit configurations are supported):
– Microsoft Windows Server 2019, with all current updates via Windows Update
Processor:Dual-core Intel or AMD processor minimum. See Processor Note for Intel/AMD Processors above.
Memory:8 GB or more recommended (per simultaneously logged in user)
Swap Space:2X the amount of RAM
[/spoiler]