; charset=UTF-8" /> Geometric DFMPro v7.0.0.7586 for NX 1847/1872.1899 Series x64 | CSKsite
DDLSpot WarezOmen
UploadGIG.com Premium

«

»

Mar 06

Geometric DFMPro v7.0.0.7586 for NX 1847/1872.1899 Series x64

Geometric DFMPro v7.0.0.7586 for NX 1847/1872.1899 Series (x64) | 264 MB

Information:

DFMPro (Design For Manufacturbility Professional) is an easy-to-use tool for verifying the manufacturability of parts and components for designers and manufacturing engineers is integrated in Siemens NX. Its use facilitates manufacturability verification and determining parts of the project, which can be time-consuming or expensive to manufacture in relation to the turning, milling, turning, milling, processing, etc. of the sheet.

Rapid analysis of technological components in terms of capacity and milling or turning is done through principles DFMPro module. You simply select the type of components – milling and turning – and within seconds get a detailed report on the possible processing problems. DFMPro find all unavailable for the cutter elements that do not meet standards of the enterprise by the ratio of the depth / diameter or by belonging to the standard range of hole diameters, rounding the outer edges and triangular inner corners, openings facing the outer faces are not perpendicular to them or crossing the internal cavity, and even inflated accuracy tolerances. For turning parts are also found groove without rounding the inner diameter and all are not rounded circular edge. The numerical values ​​of criteria manufacturability can be varied within wide limits in accordance with the requirements of the enterprise.
DFMPro used in case of high demands to the capabilities of the system to verify processability parts, and to use such a tool in relation to turning and milling and the sheet detail. This module performs a greater number of controls – and checks not only the part geometry, but the user and attributes such as brand material – but also allows to set up rules to analyze much more widely.

Year / Release Date: 2020
Version: v7.0.0 build 7586
Developer: Geometric Global
http://www.geometricglobal.com/

http://dfmpro.geometricglobal.com
Bit depth: 64bit
Language: English
Medicine: Present (TeAM SolidSUAD-SSQ)
System Requirements: Pre NX 1847/1872/1899 Series Win64

Leave a Reply