Siemens Simcenter FEMAP 2022.1.1 (x64) Multilanguage

Siemens Simcenter FEMAP 2022.1.1 (x64) Multilanguage

Siemens Simcenter FEMAP 2022.1.1 (x64) Multilanguage | 2.7 GB | Language: Multilanguage

[spoiler]
The Siemens Digital Industries Software development team is pleased to announce the availability of Simcenter Femap 2022.1.1. The latest release provides a variety of enhancements and corrections that will improve your productivity across the simulation workflow.
FEMAP 2022.1 MP1 New Features and Corrections

Meshing Toolbox – Geometry Editing Tool
– Updated the Point to Point, Point to Edge, and Edge to Edge options in the Operation section to use more robust methods to determine and process how a surface is split by these operations.
Interfaces – Geometry
– Added support for NX v2007.
Corrections
Geometry
– Corrected issue where highlighting solids created filled highlights with varying colors.
– Corrected issue where a solid made of a single faceted surface, which could potentially occur when importing geometry after performing topology optimization, were not highlighted when picking solids.
– Corrected issue where solids made of a single Parasolid faceted surface could sometimes not be selected.
– Corrected issue which caused the Geometry, Curve – From Surface, Project and Geometry, Curve – From Surfaces, Project Along Vector commands to not obey the Update Surface toggle.
– Corrected issue when using Geometry, Solid, Embed Face which prevented proper embedding of surfaces in all but one solid if multiple surfaces where selected on multiple solids.
– Corrected issue when using Geometry, Solid, Embed Face which prevented the Automatic option from being available if more than one surface was selected.
Graphics
– Corrected issue which prevented an abort from occurring during frame creation for animations.
User Interface – General
– Corrected issue that caused the Femap 2021.2 splash screen to be displayed when using a localized version of Femap 2022.1.
User Interface – Dockable Panes
Postprocessing Toolbox – Deform Tool
– Corrected issue where certain settings were being lost if the Auto Draw option was turned off. If you changed the deformation mode and then brought up a dialog box or clicked in the graphics window, the deformation mode would revert to the previous value.
Postprocessing Toolbox – Deform Tool
– Corrected issue where certain settings were being lost if the Auto Draw option was turned off. If you changed the deformation mode and then brought up a dialog box or clicked in the graphics window, the deformation mode would revert to the previous value.
Simulation Entities
– Corrected issue which caused Femap to exit expectedly if a node used by any Kinematic Joint was deleted, which could occur in a number of ways, including using the Tools, Check, Coincident Nodes command.
– Corrected issue which prevented Monitor Points, Joint Connections, and Flexible Sliders from having their entity references updated when the references are deleted.
Analysis Manager
– Corrected issue which caused the Type in the Joint Time Constraint (SOL402) dialog box to swap the DOF Fixation and DOF Liberation types when loading/unloading the dialog box. This dialog box is only available when Analysis Program is set to 36..Simcenter Nastran and Analysis Type is set to 28..Multi-Step Nonlinear Kinematic.
Interfaces – Geometry
– Corrected issue that prevented users from exporting geometry in the currently supported versions of Parasolid and ACIS.
Interfaces – Nastran
– Corrected issue which caused a memory leak that occurred any time Nastran results were read, including results that were automatically read after solving with the bundled Simcenter Nastran solver.
– Corrected issue which could cause Femap to exit unexpectedly that could occur when reading a corrupted and/or invalid Nastran file.
Interfaces – Simcenter Nastran
– Corrected issue which caused the PJOINT2 bulk data entry to be written with a syntax error when rotational nonlinear spring properties were defined without translational nonlinear spring properties.
– Corrected issue which caused overlapping IDs between connection elements (e.g. RBE2/RBE3 entires) and CJOINT bulk data entries when kinematic joints were defined in Femap as Kinematic Connections.
– Corrected issue which caused the default DOF identification between Joint nodes, the OPT field on PJOINT entry, to be loaded as Boolean in the dialog, rather than Lagrangian multipliers.
– Corrected issue which prevented the EQMFMX and EQMFMIN parameters from being exported to the NLCNTL2 entry unless DTMAX was specified (PR#10255340).
Interfaces – ANSYS
– Corrected issue which caused the element results to not be properly imported into Femap when the output file (*.rst file) was created in version of ANSYS prior to 19.0.
Output and Post-Processing
– Corrected issue where Contour Arrows shown as Resultant were not being drawn in the correct direction (PR# 10263076).
Tools
– Corrected issue with Tools, Convert Units command, which caused the Structural Damping coefficients on a Spring/Damper Property with Type set to CBUSH to be converted, which should not happen because these values are dimensionless quantities (PR# 10265545).
API
– Corrected issue with the DialogAutoSkip property. Previously it worked properly if the value was set to 1 (Press OK) or 2 (Show Dialog), but not when set to 0 (Cancel).
– Corrected issue which prevented indices 4-7 in the Property Object’s flag array from being accessed

Simcenter Femap softwareis a standalone finite element modeling (FEM) pre- and postprocessor for engineering simulation and analysis. The software is computer-aided design (CAD) independent and can import geometry from all major CAD platforms. It supports most CAD data formats. Simcenter Femap also works in combination with a wide variety of finite element analysis (FEA) solvers, including Simcenter Nastran software.
The latest release provides a variety of enhancements that will improve your productivity across the simulation workflow. Building on the advanced meshing capabilities added for Simcenter Femap 2021.2, this version sees the addition of automated hex-dominant meshing technology which eliminates the need for geometry simplification and subdivision typically required to create a high-qual-ity hex-dominant mesh. Support for Kinematic Joints and Flexible Sliders, available in Simcenter Nastran’s Multi-Step Nonlinear Kinematic solution, has been added to better capture the real-world behavior of assembly models which contain parts which move relative to one another. A new solution monitor optimized to provide valuable real-time feedback for Simcenter Nastran’s Multi-step solutions is also now available. Finally, updates to the user interface designed to improve overall user experience in various areas, such as controlling display options, entity selection, grouping, and accessing the modernized Online Help System, have been implemented
What’s New in Simcenter Femap 2022 1
Siemens PLM Software.a business unit of the Siemens Digital Factory Division, is a leading global provider of software solutions to drive the digital transformation of industry, creating new opportunities for manufacturers to realize innovation. With headquarters in Plano, Texas, and over 140,000 customers worldwide, Siemens PLM Software works with companies of all sizes to transform the way ideas come to life, the way products are realized, and the way products and assets in operation are used and understood.

Product:Siemens Simcenter FEMAP
Version:2022.1.1 (2022.1 MP1) with NX Nastran
Supported Architectures:x64
Website Home Page :www.plm.automation.siemens.com
Languages Supported:multilanguage
System Requirements:Windows *
Size:2.7 Gb

Languages Supported: ä¸æ (Simplified), ä¸æ (Traditional), English, Deutsch, æ¥æ¬èª

[/spoiler]