PTC Creo EMX 12.0.1.0 for Creo 6.0 x64 | 322 MB
Information:
Creo Expert Moldbase Extension contains detailed adapted packages of plates and individual elements of all major suppliers to meet the requirements of basic
standards in this area.
When creating a Creo Expert Moldbase Extension model unit automatically forms an assembly drawing, the specification and drawings with the plates ESKD requirements.
Formative components can be created directly in Creo Expert Moldbase Extension or use formative components created in CreoTool Design module.
Creo Expert Moldbase Extension has a dedicated graphical user interface with a two-dimensional schematic view as a prefabricated model blocks, as well as individual components. It is possible to create and use their design, components, types of used injection molding machines, to get the database of their suppliers.
The choice of the main parameters of mold components is carried out in two-dimensional mode. If necessary, parameters specifying the placement of a component designer refers to the three-dimensional structure. This approach greatly speeds up the process of developing a mold.
Typically, the full three-dimensional model of a mold assembly made in slabs holes and slots t. D. Are formed in an automated mode. In this case, all of the holes and grooves are dependent – when the component for which were carried out these components, they are also removed. When you change the size and locations of components, these geometric konstruktivy automatically rebuilt.
Creo Expert Moldbase Extension automatically places fasteners, calculates the length of the pushers and characters creates a notch along the contour of the part. To facilitate the visualization Creo Expert Moldbase Extension allows you to turn on / off the display of all components.The Creo Expert Moldbase Extension mechanism implemented disclosure mold using animation, analyzing the components in an intersection. Possible to carry out the following calculations:
comparison machine of compression force and pressure created inside the mold;
force on the wedge when it is moved (in the mechanism of the movable rod) at a predetermined course;
wedge length;
the oblique angle of the pusher;
delay (when double disclosure modeling unit);
the total project cost in the manufacture of molds.
Main advantages
High performance in the design of the model unit because the designer creates the mold from the finished adaptive components – "cubes" that have already been created drawing templates.
Reducing the likelihood of errors, because the placement of components and compliance with all necessary cut-outs with appropriate clearances fully automated.
Dimensional user interface with visualization changes enables fast elaboration of the mold without any extra time spent on the regeneration of a three-dimensional model.
Development of molds for concrete casting machine with the calculation of the required clamping force.
Automated creation of control programs for machining holes in the plates.
Calculating the cost of the mold.
Create your own library boards, components, structures, mechanisms and model blocks in a dialogue mode.
The rapid development of the module, interactive reference guide with animated videos.
Key features
Automatic placement mold components followed by removing the material in the plates.
Automatic generation of the specification, drawings and assembly drawing plates.
Automatic creation of associative tables openings in the drawings.
Creating animation mode mold sampling of interconnectivity components.
Library of standard blocks and molds individual components leading suppliers: DME, DMS, EOC, Futaba, Misumi, HASCO, KLA, Meusburger, Pedrotti, Rabourdin, Strack, FCPK and GOST library following nomenclature:
design model blocks (a standard set of all types of dimensions, pushing double, double disclosure);
set of plates and seals;
centering elements (sleeve, speakers);
shanks;
locks;
runner and the central sleeve;
pushers and kontrtolkateli;
stops;
fixing elements;
pins;
support;
circuits and elements of the cooling system;
mechanisms of the movable shaft;
tilt mechanism pushed;
dual mechanisms disclosure;
transmission mechanisms for threaded models;
scheme hot runner nozzle, manifolds, flanges.
Create custom libraries with their own types of structures and parts of molds.Year / Release Date: 2020
Version: 12.0.1.0
Developer: PTC
Developer website: http://www.ptc.com/
Bit depth: 64bit
Language: Multilingual (Russian available)
Crack: not required extra tablet
System requirements: Have pre-Creo Parametric 6.0 with a crowbar by SSQ
