Cadence SPB Allegro and OrCAD 17.40.003-2019 Hotfix Only x64

Cadence SPB Allegro and OrCAD v17.40.003-2019 Hotfix Only x64 | 2.57 GB

Information:

OrCAD/Allegro one of the best and most professional software simulation and analysis electronic circuits and electronic design automation software division (Electronic Design Automation or abbreviated EDA) is.OrCAD consists of two words that in fact the state of Oregon was the birthplace of early versions of the software and CAD stands for Computer-aided design and computer design means is formed. Cadence SPB OrCAD OrCAD PCB set to Allegro PCB or also known, including various programs to design schematic, simulation and analysis of electronic is circuits.

Facilities and software features of Cadence SPB OrCAD:
-suitable graphical user environments and display circuit using icons
-OrCAD Capture and Capture CIS schematic design circuits in powerful environment
-Ability to design PCB (Printed Circuit Board stands and means the board or PCB)
-has an extensive library full of components and electronic devices
-Advanced simulation and analysis electronic circuits in a graphical environment PSpice
-environment Orcad PCB Designer / Editor to design and edit PCB
-Ability to interact with MATLAB and Simulink software

System Requirements:
OS:Windows 10 (64-bit) Professional, including Dark Theme mode; Windows Server 2012 (All Service Packs); Windows Server 2012 R2; Windows Server 2016.
CPU: Intel® Core™ i7 4.30 GHz or AMD Ryzen™ 7 4.30 GHz with at least 4 cores
Memory: 16 GB RAM
Space: 50 GB free disk space (SSD drive is recommended)
Display: 1920 x 1200 display resolution with true color (at least 32bit color)
GPU: A dedicated graphics card supporting OpenGL, minimum 2GB (with additional support for DX11 for 3D Canvas)
Monitors: Dual monitors (For physical design)
Supported MATLAB Version: R2019A-64Bit (For the PSpice-MATLAB interface)

WHATS NEW:

Cadence SPB Allegro and OrCAD v17.40.003-2019 Hotfix Only Release Notes:
-ADW DBEDITOR Local Flow Verify – Failed to verify the part due to the error null – FAILED
-ADW DBEDITOR Unable to release a part – For logical part, pack type is present in chips.prt but missing in ptf
-ADW PART_BROWSER Part Information Manager not displaying DRA footprints in lower-level folders
-ALLEGRO_EDITOR ARTWORK Drill Symbol Triangle has an offset in Artwork
-ALLEGRO_EDITOR DATABASE Export libraries cannot export package
-ALLEGRO_EDITOR DFM DesignTrue annular ring SMD pin to antipad checks not working in HotFix 058
-ALLEGRO_EDITOR DFM DFF check of ‘Copper Spacing: Shape to Shape’ should not generate DRC for shapes generated for teardrop
-ALLEGRO_EDITOR EDIT_ETCH PCB Editor stops responding when routing an arc by using the ‘Connect’ command
-ALLEGRO_EDITOR EDIT_ETCH PCB Editor stops responding when routing a cline
-ALLEGRO_EDITOR GRAPHICS Unused pad suppression is not working on a few nets
-ALLEGRO_EDITOR IN_DESIGN_ANA On creating groups for Return Path Analysis, PCB Editor crashes
-ALLEGRO_EDITOR PAD_EDITOR Import/Export .pxml file issue: thermal data is not imported
-ALLEGRO_EDITOR PLACEMENT Via array staggered not working
-ALLEGRO_EDITOR SCHEM_FTB 17.4 Design sync is not working with spaces in the path
-ALLEGRO_EDITOR SCHEM_FTB Capture crashes when board filename contains a space
-ALLEGRO_EDITOR SCHEM_FTB Capture crashes if new layout name or path has spaces
-ALLEGRO_EDITOR SCHEM_FTB Design Sync fails when there is space character in project directory
-ALLEGRO_EDITOR SCHEM_FTB Capture 17.4 goes into ‘not responding’ mode when the design sync contains space or different characters
-ALLEGRO_EDITOR SCHEM_FTB Design sync in capture stops responding if there are spaces in directory name
-ALLEGRO_EDITOR SCHEM_FTB Design sync does not work. Gives error about something in session log, that is not there.
-ALLEGRO_EDITOR SCHEM_FTB Design Sync fails when there is space character in project directory
-ALLEGRO_EDITOR SCHEM_FTB Capture crash on creating new layout when design file path has space in it
-ALLEGRO_EDITOR SCHEM_FTB Capture crash on creating new layout because of space in board filename
-ALLEGRO_EDITOR SHAPE Board crashes with Shape update
-ALLEGRO_EDITOR UI_FORMS Custom SKILL form display gets extended in release 17.4-2019
-ALLEGRO_EDITOR UI_FORMS Property edit/assign window does not show Value column
-ALLEGRO_EDITOR UI_FORMS In File > Import Logic/Netlist, TAB key selection is not working properly
-ALLEGRO_EDITOR UI_FORMS Add space after the X and Y labels in the Define Grid window
-ALLEGRO_EDITOR UI_FORMS GUI from SKILL routines are all truncated in release 17.4-2019 but are fine in previous releases
-ALLEGRO_EDITOR UI_FORMS Issue with Property Edit – ‘DYN_THERMAL_CON_TYPE ‘ Assign form: Form can be resized but is not dynamic
-ALLEGRO_EDITOR UI_FORMS Edit property window has column with fixed size
-ALLEGRO_EDITOR UI_FORMS assign window for Property Edit does not show Value column
-ALLEGRO_EDITOR UI_GENERAL Alt key removes heads up display
-ALLEGRO_EDITOR UI_GENERAL Panning does not work in 17.4 when pcb_autoroam environment variable is set
-ALLEGRO_EDITOR UI_GENERAL Allegro editors and viewers crash if allegro_history set to 0.
-ALLEGRO_PROD_TOOLB CORE PCB Design Compare – Limit check to outline extents only functionality
-ALLEGRO_PROD_TOOLB CORE Placing a module in Fab panelization gives error message regarding handling nil
-ALTM_TRANSLATOR PCB_EDITOR Third-party translator translating symbol names incorrectly
-APD DIE_GENERATOR Die symbol property reset does not work
-APD PADSTACK_EDIT Pad Editor cannot save the pad and cannot close it.
-CAPTURE DRC PCB Footprint symbols in a completed 17.2 design are reported as missing in Capture Online DRC
-CAPTURE NETLIST_ALLEG Cross-section layers not creating in Constraint Manager in release 17.4-2019
-CAPTURE NETLIST_ALLEG Design sync is not respecting the character length limit specified in Create Netlist dialog under Setup
-CAPTURE NETLIST_ALLEG Sync between Capture and PCB Editor fails if custom PCB Footprint property is used
-CAPTURE NETLIST_ALLEG Design sync is not respecting the character length limit specified in Create Netlist dialog under Setup
-CAPTURE NETLIST_ALLEG Netlsiting displays errors but the log file is empty
-CAPTURE PCBFLOW Netrev process continuously running in background even when capture is left idle and nothing is happening
-CONCEPT_HDL CORE Validating physical part information for components in design – DE-HDL stops responding for 2 minutes
-CONCEPT_HDL CORE Choosing ‘Rename signal’ should prompt to save all pages
-CONCEPT_HDL CORE Allegro Design Entry HDL crashes when run from command line
-CONCEPT_HDL CORE Layer specific constraints are displayed incorrectly on the canvas
-CONCEPT_HDL CORE Restrict modifying the text size of attributes on the canvas when a component is locked
-CONCEPT_HDL CREFER Crefer missing when instance and part names are same
-CONCEPT_HDL CREFER crefer treats all notes as left-justified in release 17.2-2016, HotFix 061
-CONCEPT_HDL OTHER net_spacing_type cannot be deleted from nets
-CONSTRAINT_MGR ANALYSIS CM physical – add via to from Library stops responding in release 17.4 HotFix 002
-CONSTRAINT_MGR DATABASE Undesired multiple Targets set for a single Matched Group in CM
-CONSTRAINT_MGR UI_FORMS Switching worksheets from "CSet Assignment Matrix" to other worksheet is slow
-CONSTRAINT_MGR UI_FORMS Directive CM_FILTER_SKILL_DEFINED_PSCSETS is not working in release 17.4, HotFix 001
-INSTALLATION BASE "Anyone who uses this computer (All Users)" is disabled even when the user is with Administrator privileges.
-INSTALLATION BASE ‘Install for all users’ is grayed out while installing release 17.4-2019
-INSTALLATION BASE "Anyone who uses this computer (All Users)" is disabled even when the user is with Administrator privileges.
-ORBITIO LEFDEFINTERFA OrbitIO stops responding when importing Innovus created def
-PSPICE LIBRARIES Incorrect search result and message for EVALAA
-PULSE R2PLM Invalid credentials during login: require to close and run R2PLM
-PULSE R2PLM Stale BOM is published unless BOM refresh icon is clicked
-PULSE UNIFIED_SEARC "+" in part name causing errors in Search
-PULSE UNIFIED_SEARC Search Providers does not allow to place parts and keeps waiting for result
-SCM SETUP Adding PINUSE column to CCP crashes SCM
-SIG_EXPLORER OTHER SigXPlorer crashes when launching Help > About
-SIG_EXPLORER OTHER SigXPlorer cannot be launched with Aurora in release 17.4-2019
-SYSTEM_CAPTURE ARCHIVER Error regarding missing cell on archiving a design
-SYSTEM_CAPTURE DOCUMENTATION Application notes refer to incorrect location in release 17.4-2019
-SYSTEM_CAPTURE DRC Crash while executing Tcl command ‘setDRC’ before opening the project
-SYSTEM_CAPTURE PACKAGER RefDes conflict violation does not appear when PACK_IGNORE is removed from a part and a conflict is created
-SYSTEM_CAPTURE PACKAGER RefDes disappears from the part because of PACK_IGNORE when doing a Copy/Paste