InventorCAM 2017 SP2 HF1 Multilang for Autodesk Inventor (x64)

InventorCAM 2017 SP2 HF1 Multilang for Autodesk Inventor (x64) | 3.19 GB

Information:

InventorCAM is a new generation CAD / CAM system developed by Israeli firm SolidCAM Ltd (Official distributor in Russia – Consistent Software). This system is a complete solution for the automation of metalworking production. With the use of a wide range of strategies offered by InventorCAM for turning, milling, turning and electro-erosion machining, a technologist can quickly prepare the necessary set of control programs for machining a product.

InventorCAM Functionality
Support for 64bit calculations due to the availability of a special version for SW 64bit
2.5-axis milling
InventorCAM provides high efficiency and accuracy of 2.5-axis milling of parts. Various processing strategies for elements such as contour, sampling (with islands) and groove, as well as various types of hole machining are supported: drilling, reaming, threading, etc. The system has a wide range of possibilities for 2.5-coordinate processing of analytical surfaces.

3-axis milling
InventorCAM provides a wide range of tools that can be effectively used for processing products with complex geometries (stamps, molds) and prismatic parts. As a geometry for 3-axis machining, a three-dimensional surface or solid model is used. The system supports various types of roughing and finishing strategies, such as raster processing with a specified or automatically determined angle of the raster, equidistant processing, projection processing, treatment by waterlines, etc.
In addition to the already listed capabilities of 2.5- and 3-axis machining, InventorCAM offers tools to identify and refine areas that were not processed in previous transitions. It is possible to create a database of standard technological processes. Once created, this parameterized technological process can be repeatedly used in the future, which significantly reduces the time of preparation of production, increases the reliability of the developed programs, unifies the style of technological developments, guarantees the use of only optimal processing technologies and ensures the production independence from the human factor. The absence of incisions is guaranteed by the presence of means of control and visualization of machining.
Multi-axis machining
InventorCAM offers a variety of tools for creating multi-axis machining programs at 4- and 5-axis machining centers. The model is installed in the user defined processing plane, after which the system automatically calculates all the necessary displacement and rotation parameters for the workpiece zero. As a result, the preparatory-final transition time is significantly reduced and the accuracy of processing is increased.
Turning and turning-milling processing
InventorCAM has a wide range of functions for automating the creation of control programs for turning and turning and milling. InventorCAM supports various types of tools, which allows you to effectively produce longitudinal turning, trimming, grooving, etc. In addition, InventorCAM allows you to automatically produce roughing and finishing of complex contours. Support for the rotating tool allows you to perform milling and drilling crossings on machining centers.
Electroerosive processing
The InventorCAM set of strategies for wire EDM allows the processing of external and internal contours with a constant and variable angle of inclination. There is a possibility of 4-axis machining. A special algorithm prevents the falling of the processed material. InventorCAM provides the user with the means to control the physical processing parameters along the entire path of the wire.

ATTENTION! Users of Delcam PowerMILL 2015-2016 under Multikey key emulator!
Version Multikey Emulator 18.1.0 64-bit in this release is NOT compatible with Delcam PowerMILL 2015-2016!
The solution for installing both SolidCAM and PowerMILL on the same computer under Multikey is in the distribution of PowerMILL 2016-but the version of the emulator laid out there assumes the mandatory loading of Windows into the test mode, which is not required with the version of the emulator from this distribution

So as not to swing too much!
1. Download the installation of the English version and one (or several) archives with the localizations you need
2. Install the English version
3. Add to the program directory of the installed program folder from the archive (archives) localization
4. Via select the desired language

Year / Release Date: 2018
Version: 2017 SP2 HF1 build 88711
Developer: SolidCAM Ltd
Bit depth: 64bit
Language: Multilingual (Russian is present)
Chinese Simplified, Chinese Traditional, Czech, Danish, Dutch, English, French, German, Hebrew, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Turkish
Tabletka: Present (TeAM SolidSQUAD-SSQ)
System requirements:
Pre-installed Autodesk Inventor 2018 (and below) 64bit only
Additional information:

What News?
Integration with Invertor software environment
The work environment is similar to the other tools in the inverter software
Enjoy iMachining technology to save time (claimed by the 70% savings maker)
Standard production output can be used in other host software processes
The possibility of designing the most sophisticated CNC machining systems
Have an online guide for different parts of the program
Easy plugin functionality
And…

https://www.anonymz.com/?http://www.solidcam.com